Pin and bush kit bucket cylinder suitable for Case CX130 excavator from serial number DCH13B2009

Pin and bush kit bucket cylinder suitable for Case CX130 excavator from serial number DCH13B2009

This pin and bush kit is a complete kit for the bucket cylinder on the Case CX130 excavator. The set is suitable for repairing the pivot when pins, bushes or associated parts are worn, and follows the dimensions and use of the original attachment.

Suitable for

• Brand: Case
• Case CX130 excavator, from serial number DCH13B2009 (range DCH13B2009-UP)
• Assembly: bucket cylinder
• Position on boom: 8

Please check the machine's serial number against the specified ranges for Case CX130 excavator before ordering.

Contents of the set

The set consists of 1 pin, 1 bush and 2 seals.

Use

Fit the kit at the marked position 8 (bucket cylinder). Before installation, compare the parts list with the worn original kit on the Case CX130 excavator. This way you clearly assign pins, bushes and seals to the correct pivot.

* The items listed are not original parts, but parts from other, alternative manufacturers. The items listed correspond to those of the original manufacturers only in their dimensions and intended use.