Pin kit bucket cylinder suitable for Case CK38 excavator from serial number GCK3855399

Pin kit bucket cylinder suitable for Case CK38 excavator from serial number GCK3855399

This pin kit is the suitable pin kit for the bucket cylinder on the Case CK38 excavator. The pins replace worn original pins in this assembly and restore the connection.

Suitable for

• Brand: Case
• Case CK38 excavator, from serial number GCK3855399 (range GCK3855399-UP)
• Assembly: bucket cylinder
• Position on boom: 8

Please check the machine's serial number against the stated ranges for Case CK38 excavators before ordering.

Contents of the set

The set consists of 1 pin.

Use

Fit the kit at the marked position 8 (bucket cylinder). Before installation, compare the parts list with the worn original kit on the Case CK38 excavator. This way you clearly assign pins, bushes and seals to the correct pivot.

* The items listed are not original parts, but parts from other, alternative manufacturers. The items listed correspond to those of the original manufacturers only in their dimensions and intended use.