Six disc 507mm x 4mm, smooth suitable for Lemken|3490027

Six disc 507 x 4 mm, smooth – suitable for Lemken

For the precise replacement of a worn disc, dimensions and fastening are particularly important. This six-disc is made with a 507 mm outer diameter and 4 mm material thickness. The smooth edge shape and the bore geometry should match the previously installed disc. It is listed for Lemken. Additionally, the disc is specified as Niaux quality.

Technical data of the disc

• Outer diameter: 507 mm
• Thickness: 4 mm
• Edge shape: smooth
• Number of holes: 6
• Hole diameter / bore: 10 mm
• Pitch circle diameter: 100 mm
• Quality / manufacturer designation: Niaux quality

Suitable for and comparison numbers

The disc is for Lemken listed. For additional identification, the following numbers stored in the product data can be used: 3490027.

Check dimensions and hole pattern before ordering

The smooth edge shape should match the previous equipment of the machine; it is an important selection criterion compared to serrated or wavy variants. Use the technical data not only by diameter but as a complete hole pattern. Number and shape of the holes as well as the bolt circle are as relevant for assembly as diameter and thickness. The indication "suitable for Lemken" serves for allocation but does not replace the technical dimension comparison within the respective series.