Six disc 500mm x 5 mm, smooth suitable for Kverneland KK076407

Six disc 500 x 5 mm, smooth – suitable for Kverneland

The six-disc with a 500 mm outer diameter and 5 mm material thickness is suitable as a spare part if the technical connection dimensions of the existing disc match. In addition to the outer diameter, the edge shape, number of holes, bolt circle and hub mounting must be checked. It is listed for Kverneland. Additionally, the disc is specified as Niaux quality.

Technical data of the disc

• Outer diameter: 500 mm
• Thickness: 5 mm
• Edge shape: smooth
• Number of holes: 4
• Hole diameter / bore: 12,5 mm
• Pitch circle diameter: 100 mm
• Quality / manufacturer designation: Niaux quality

Suitable for and comparison numbers

The disc is for Kverneland listed. For additional identification, the following numbers stored in the product data can be used: KK076407.

Check dimensions and hole pattern before ordering

The smooth edge shape should match the existing equipment of the machine; it is an important selection criterion compared to serrated or wavy variants. Please check the dimensions preferably on the removed disc or based on the spare parts documentation of your machine. A selection based solely on manufacturer or outer diameter is often not sufficient for concave discs. The designation “suitable for Kverneland” serves for assignment but does not replace the technical dimensional comparison within the respective series.