Six-disc 500mm x 5 mm, serrated jagged suitable for Rabe 7209.01.02

Six-disc 500 x 5 mm, jagged – suitable for Rabe

For the precise replacement of a worn disc, dimensions and fastening are especially important. This six-disc has an outer diameter of 500 mm and a material thickness of 5 mm. The jagged edge shape and the hole geometry should match the previously mounted disc. It is listed for Rabe.

Technical data of the disc

• Outer diameter: 500 mm
• Thickness: 5 mm
• Edge shape: serrated
• Number of holes: 6
• Hole diameter / bore: 8,5 mm
• Pitch circle diameter: 87 mm
• Central hole / hub mounting: 65 mm

Suitable for and comparison numbers

The disc is for Rabe listed. For additional identification, the following numbers stored in the product data can be used: 7209.01.02.

Check dimensions and hole pattern before ordering

For a jagged disc, the existing machine should also be equipped with a corresponding edge shape; the serration is a significant distinguishing feature compared to smooth discs. Use the technical data not only by diameter but as a complete hole pattern. The number and shape of the holes as well as the bolt circle are as relevant for mounting as diameter and thickness. The designation "suitable for Rabe" serves for assignment but does not replace the technical dimensional comparison within the respective series.