Six disc 405mm x 3mm, smooth suitable for Vredo 31-166CO-R66C

Six disc 405 x 3 mm, smooth – suitable for Vredo

The six-disc with a 405 mm outer diameter and 3 mm material thickness is suitable as a spare part if the technical connection dimensions of the existing disc match. In addition to the outer diameter, the edge shape, number of holes, bolt circle and hub mounting must be checked. It is listed for Vredo.

Technical data of the disc

• Outer diameter: 405 mm
• Thickness: 3 mm
• Edge shape: smooth
• Number of holes: 3
• Hole diameter / bore: 10,5 mm
• Pitch circle diameter: 85 mm
• Central hole / hub mounting: 52 mm

Suitable for and comparison numbers

The disc is for Vredo listed. For additional identification, the following numbers stored in the product data can be used: 31-166CO-R66C.

Check dimensions and hole pattern before ordering

The smooth edge shape should match the existing equipment of the machine; it is an important selection criterion compared to serrated or wavy variants. Use the technical data not only by diameter but as a complete hole pattern. The number and shape of the holes as well as the bolt circle are just as relevant for assembly as diameter and thickness. The designation "suitable for Vredo" serves for classification but does not replace the technical dimensional comparison within the respective series.