Pin and bush kit dipper arm cylinder suitable for Caterpillar M316C excavator series prefix H2C

Pin and bush kit dipper arm cylinder suitable for Caterpillar M316C excavator series prefix H2C

This pin and bush kit is a complete kit for the dipper arm cylinder on the Caterpillar M316C excavator. The set is suitable for repairing the pivot if pins, bushes or related parts are worn, and follows the dimensions and use of the original attachment.

Suitable for

• Brand: Caterpillar
• Model: M316C excavator
• Serial prefix H2C (identifier H2C)
• Assembly: dipper arm cylinder
• Position on boom: 6

Assignment by machine serial number: Serial prefix H2C (identifier H2C). Please check prefix or serial number on the Caterpillar M316C before ordering.

Contents of the set

The set consists of 1 pin, 1 bush and 2 seals.

Use

Fit the kit at the marked Position 6 (dipper arm cylinder). Before installation, compare the parts list with the worn original kit on the Caterpillar M316C. This way you clearly assign pins, bushes and seals to the correct pivot.

* The items listed are not original parts, but parts from other, alternative manufacturers. The items listed correspond to those of the original manufacturers only in their dimensions and intended use.