Pin and bush kit bucket suitable for Caterpillar M318D excavator serial prefix W8P

Pin and bush kit bucket suitable for Caterpillar M318D excavator serial prefix W8P

This pin and bush kit is a complete kit for the bucket on the Caterpillar M318D excavator. The set is suitable for repairing the pivot when pins, bushes or associated parts are worn and follows the dimensions and use of the original attachment.

Suitable for

• Brand: Caterpillar
• Model: M318D excavator
• Series prefix W8P (identification W8P)
• Assembly: bucket
• Position on the boom: 12

Assignment via the machine serial number: series prefix W8P (identification W8P). Please check prefix or serial number on the Caterpillar M318D before ordering.

Contents of the set

The set consists of 1 pin, 2 bushes and 2 seals.

Use

Fit the kit at the marked position 12 (bucket). Compare the parts list with the worn original set on the Caterpillar M318D before installation. This way you clearly assign pins, bushes and seals to the correct pivot.

* The items listed are not original parts, but parts from other, alternative manufacturers. The items listed correspond to those of the original manufacturers only in their dimensions and intended use.