Pin and bush kit bucket suitable for Caterpillar 301.7 CR excavator series prefix JH7

Pin and bush kit bucket suitable for Caterpillar 301.7 CR excavator series prefix JH7

This pin and bush kit is a complete kit for the bucket on the Caterpillar 301.7 CR excavator. The set is suitable for repairing the pivot when pins, bushes or related parts are worn, and follows the dimensions and use of the original attachment.

Suitable for

• Brand: Caterpillar
• Model: 301.7 CR excavator
• Series prefix JH7 (identifier JH7)
• Assembly: bucket
• Position on boom: 10

Assignment via the machine serial number: series prefix JH7 (identifier JH7). Please check the prefix or serial number on the Caterpillar 301.7 CR before ordering.

Contents of the set

The set consists of 1 pin, 2 bushes and 2 seals.

Use

Fit the kit at the marked position 10 (bucket). Before installation, compare the parts list with the worn original kit on the Caterpillar 301.7 CR. This way you clearly assign pins, bushes and seals to the correct pivot.

* The items listed are not original parts, but parts from other, alternative manufacturers. The items listed correspond to those of the original manufacturers only in their dimensions and intended use.