Hydraulic top link CAT 3 | 650mm - 876mm | 90mm cylinder | fork joint

Hydraulic top link Cat 3 with fork joint head

Technical data and features:

• Category: 3 / 3 (32 mm)
• Maximum length: 876 mm
• Minimum length: 650 mm
• Stroke: 226 mm
• Cylinder piston: 45 mm
• Cylinder diameter (inside): 90 mm
• Cylinder diameter (outer) 102 mm
• Lock block position: top
• Tractor-side installation depth (pin centre to cylinder base): 152 mm
• Cylinder push force at 180 bar: 11700 kg*
• Cylinder pull force at 180 bar: 8770 kg*
• Suitable size for tractors in the medium and upper power range
• Fork joint head (cardan joint) for maximum stability and more freedom of movement
• Fork joint head - welded to cylinder base

Scope of delivery:

With CBM quality grab hooks, hose kit, plug and dust caps, operating cable, ball Cat 3/3 in the grab hook.

Optional retaining brackets can be supplied in 4 different variants:

Universal use for all tractor makes - ready-to-fit complete kit with hose and connector

Hydraulic top link universally suitable for all tractor makes.
Mit diesem Einbaumaß von 650 mm bis 876 mm wird ein sehr großer Teil der gängigen Schlepper-Baureihen abgedeckt. Basierend auf einem robusten Zylinder mit 90 mm Durchmesser findet dieser Oberlenker Verwendung in der 120 bis 200 PS-Klasse. Um den Oberlenker auch für Schlepper in den Leistungsklassen der Kategorie 2 (25,4mm) zu verwenden, kann der Gabelgelenkkopf mit einer Reduzierhülse und der Haken mit einer Reduzierkugel jeweils von Kategorie 3 (32mm) für Kategorie 2 verwendet werden.

An important criterion for the safety and stability of hydraulic top links is the locking hook. Hydraulic top links from tekkhus.com are generally manufactured with proven quality grab hooks from CBM. CBM is considered one of the renowned manufacturers of three-point parts and supplies tractor manufacturers in original equipment.

*Note on the tensile and compressive force of the top link:
Please note: The specified data of this hydraulic top link regarding cylinder push and pull force do not provide any information about the actual load capacity of the top link. The specified data only refer to the pull and push forces of the cylinder installed in the top link.