Hex disc 630mm x 5 mm, smooth suitable for KET Weimar 000.02.000.06

Hex disc 630 x 5 mm, smooth – suitable for KET Weimar

For the precise replacement of a worn disc, dimensions and mounting are especially important. This hex disc has an outer diameter of 630 mm and a material thickness of 5 mm. The smooth edge shape and the hole geometry should match the previously installed disc. It is listed for KET Weimar. Additionally, the disc is specified as Niaux quality.

Technical data of the disc

• Outer diameter: 630 mm
• Thickness: 5 mm
• Edge shape: smooth
• Number of holes: 4
• Hole diameter / bore: 12,5 mm
• Pitch circle diameter: 110 mm
• Central hole / hub mounting: 101 mm
• Quality / manufacturer designation: Niaux quality

Suitable for and comparison numbers

The disc is for KET Weimar listed. For additional identification, the following numbers stored in the product data can be used: 000.02.000.06.

Check dimensions and hole pattern before ordering

The smooth edge shape should match the previous equipment of the machine; it is an important selection criterion compared to serrated or wavy variants. Use the technical data not only by diameter but as a complete hole pattern. The number and shape of the holes as well as the bolt circle are as relevant for mounting as diameter and thickness. The designation “suitable for KET Weimar” serves for allocation but does not replace the technical dimension comparison within the respective series.