Disc harrow disc 710mm x 8 mm, smooth suitable for Quivogne|McCormick

Disc harrow disc 710 x 8 mm, smooth – suitable for McCormick and Quivogne

For the precise replacement of a worn disc, dimensions and fastening are particularly important. This disc harrow disc has an outer diameter of 710 mm and a material thickness of 8 mm. The smooth edge shape and the bore geometry should match the previously installed disc. It is listed for McCormick and Quivogne. Additionally, the disc is specified as Niaux quality.

Technical data of the disc

• Outer diameter: 710 mm
• Thickness: 8 mm
• Edge shape: smooth
• Number of holes: Rectangle 4
• Hole diameter / bore: 14 mm
• Pitch circle diameter: 230 mm
• Central hole / hub mounting: 26 mm
• Quality / manufacturer designation: Niaux quality

Suitable for and comparison numbers

The disc is for McCormick and Quivogne listed. For additional identification, the following numbers stored in the product data can be used: DSQ07104.

Check dimensions and hole pattern before ordering

The smooth edge shape should match the existing equipment of the machine; it is an important selection criterion compared to serrated or wavy variants. Check the dimensions preferably on the disassembled disc or using the spare parts documentation of your machine. Selection based solely on manufacturer or outer diameter is often not sufficient for concave discs. The designation "suitable for McCormick and Quivogne" serves for classification but does not replace the technical dimension comparison within the respective series.