Disc harrow disc 568mm x 5 mm, smooth suitable for Salford 10010771

Disc harrow disc 568 x 5 mm, smooth – suitable for Salford

For the precise replacement of a worn disc, dimensions and fastening are particularly important. This disc harrow disc has an outer diameter of 568 mm and a material thickness of 5 mm. The smooth edge shape and the bore geometry should match the previously mounted disc. It is listed for Salford.

Technical data of the disc

• Outer diameter: 568 mm
• Thickness: 5 mm
• Edge shape: smooth
• Number of holes: 5
• Hole diameter / bore: 13,5 mm
• Pitch circle diameter: 184 mm
• Central hole / hub mounting: 103 mm

Suitable for and comparison numbers

The disc is for Salford listed. For additional identification, the following numbers stored in the product data can be used: CT512250, 10010771.

Check dimensions and hole pattern before ordering

The smooth edge shape should match the existing equipment of the machine; it is an important selection criterion compared to serrated or wavy variants. Check the dimensions preferably on the disassembled disc or using the spare parts documentation of your machine. A selection based solely on manufacturer or outer diameter is often not sufficient for concave discs. The designation "suitable for Salford" serves for classification but does not replace the technical dimension comparison within the respective series.