Disc harrow disc 560mm x 6 mm, flat serrated suitable for Farmet

Disc harrow disc 560 x 6 mm, flat serrated – suitable for Farmet

For the precise replacement of a worn disc, dimensions and fastening are especially important. This disc harrow disc has an outer diameter of 560 mm and a material thickness of 6 mm. The serrated edge shape and hole geometry should match the previously mounted disc. It is listed for Farmet. Additionally, the disc is designated as Niaux quality. The flat design should also be considered when assigning.

Technical data of the disc

• Outer diameter: 560 mm
• Thickness: 6 mm
• Edge shape: serrated
• Version: flat
• Number of holes: 4
• Hole diameter / bore: 12,5 mm
• Pitch circle diameter: 98 mm
• Quality / manufacturer designation: Niaux quality

Suitable for and comparison numbers

The disc is for Farmet listed. For additional identification, the following numbers stored in the product data can be used: 3006559.

Check dimensions and hole pattern before ordering

For a serrated disc, the existing machine should also be equipped with a corresponding edge shape; the serration is a significant distinguishing feature compared to smooth discs. Check the dimensions preferably on the removed disc or based on the spare parts documentation of your machine. A selection based solely on manufacturer or outer diameter is often insufficient for disc harrows. The designation “suitable for Farmet” serves for assignment but does not replace the technical dimension comparison within the respective series.