Disc harrow disc 510mm x 5 mm, serrated suitable for Vogel & Noot

Disc harrow disc 510 x 5 mm, serrated – suitable for Vogel & Noot

For the precise replacement of a worn disc, dimensions and fastening are especially important. This disc harrow disc has an outer diameter of 510 mm and a material thickness of 5 mm. The serrated edge shape and the hole geometry should match the previously mounted disc. It is listed for Vogel & Noot. Additionally, the disc is designated as Niaux quality.

Technical data of the disc

• Outer diameter: 510 mm
• Thickness: 5 mm
• Edge shape: serrated
• Number of holes: 4
• Hole diameter / bore: 12,5 mm
• Pitch circle diameter: 98 mm
• Quality / manufacturer designation: Niaux quality

Suitable for and comparison numbers

The disc is for Vogel & Noot listed. For additional identification, the following numbers stored in the product data can be used: RA132406.

Check dimensions and hole pattern before ordering

For a serrated disc, the existing machine should also be equipped with a corresponding edge shape; the serration is a significant distinguishing feature compared to smooth discs. Before ordering, compare outer diameter, thickness, number of holes, bore diameter, bolt circle and centre hole or hub fitting. Even small deviations in the hole pattern can cause a disc not to fit despite having the same outer diameter. The specification "suitable for Vogel & Noot" serves as an assignment but does not replace the technical dimension comparison within the respective series.