Disc harrow disc 510mm x 5 mm, serrated suitable for Rabe|Gregoire Besson

Disc harrow disc 510 x 5 mm, serrated – suitable for Gregoire Besson and Rabe

For the precise replacement of a worn disc, dimensions and fastening are particularly important. This disc harrow disc has an outer diameter of 510 mm and a material thickness of 5 mm. The serrated edge shape and the hole geometry should match the previously mounted disc. It is listed for Gregoire Besson and Rabe. Additionally, the disc is specified as Niaux quality.

Technical data of the disc

• Outer diameter: 510 mm
• Thickness: 5 mm
• Edge shape: serrated
• Number of holes: 4
• Hole diameter / bore: 12,5 mm
• Pitch circle diameter: 98 mm
• Quality / manufacturer designation: Niaux quality

Suitable for and comparison numbers

The disc is for Gregoire Besson and Rabe listed. For additional identification, the following numbers stored in the product data can be used: 101-21212.

Check dimensions and hole pattern before ordering

For a serrated disc, the existing machine should also be equipped with a corresponding edge shape; the serration is a significant distinguishing feature compared to smooth discs. For a reliable assignment, a direct dimensional comparison with the removed disc is recommended. Especially the bolt circle and hub mounting often differ between versions with the same diameter. The specification "suitable for Gregoire Besson and Rabe" serves for assignment but does not replace the technical dimensional comparison within the respective series.