Disc harrow disc 510mm x 5 mm, serrated suitable for Köckerling

Disc harrow disc 510 x 5 mm, serrated – suitable for Köckerling

For the precise replacement of a worn disc, dimensions and fastening are particularly important. This disc harrow disc has an outer diameter of 510 mm and a material thickness of 5 mm. The serrated edge shape and the hole geometry should match the previously mounted disc. It is listed for Köckerling.

Technical data of the disc

• Outer diameter: 510 mm
• Thickness: 5 mm
• Edge shape: serrated
• Number of holes: 4
• Hole diameter / bore: 12 mm
• Pitch circle diameter: 98 mm

Suitable for and comparison numbers

The disc is for Köckerling listed. For additional identification, the following numbers stored in the product data can be used: 31-0982.

Check dimensions and hole pattern before ordering

For a serrated disc, the existing machine should also be equipped with a corresponding edge shape; the serration is a significant distinguishing feature compared to smooth discs. Before ordering, compare outer diameter, thickness, number of holes, bore diameter, bolt circle and centre hole or hub fitting. Even small deviations in the hole pattern can cause a disc not to fit despite having the same outer diameter. The designation "suitable for Köckerling" serves for classification but does not replace the technical dimension comparison within the respective series.