Disc harrow disc 510mm x 5 mm, flat serrated suitable for Kuhn

Disc harrow disc 510 x 5 mm, flat serrated – suitable for Kuhn

For the precise replacement of a worn disc, dimensions and fastening are particularly important. This disc harrow disc has an outer diameter of 510 mm and a material thickness of 5 mm. The serrated edge shape and the hole geometry should match the previously installed disc. It is listed for Kuhn. Additionally, the disc is specified as Niaux quality. The flat design must also be taken into account when assigning.

Technical data of the disc

• Outer diameter: 510 mm
• Thickness: 5 mm
• Edge shape: serrated
• Version: flat
• Number of holes: Rectangle 6
• Hole diameter / bore: 12 mm
• Pitch circle diameter: 100 mm
• Quality / manufacturer designation: Niaux quality

Suitable for and comparison numbers

The disc is for Kuhn listed. For additional identification, the following numbers stored in the product data can be used: H2203180, 2234350.

Check dimensions and hole pattern before ordering

For a serrated disc, the existing machine should also be equipped with a corresponding edge shape; the serration is a significant distinguishing feature compared to smooth discs. Check the dimensions preferably on the dismantled disc or based on the spare parts documentation of your machine. A selection based solely on manufacturer or outer diameter is often not sufficient for concave discs. The designation "suitable for Kuhn" serves for allocation but does not replace the technical dimension comparison within the respective series.