Disc harrow disc 510mm x 5 mm, flat serrated suitable for Dometal 02KIE1

Disc harrow disc 510 x 5 mm, flat serrated – suitable for Dometal

For the precise replacement of a worn disc, dimensions and fastening are especially important. This disc harrow disc has an outer diameter of 510 mm and a material thickness of 5 mm. The serrated edge shape and hole geometry should match the previously mounted disc. It is listed for Dometal. The flat design must also be considered when assigning.

Technical data of the disc

• Outer diameter: 510 mm
• Thickness: 5 mm
• Edge shape: serrated
• Version: flat
• Number of holes: 5
• Hole diameter / bore: 12,5 mm
• Pitch circle diameter: 113 mm
• Central hole / hub mounting: 58 mm

Suitable for and comparison numbers

The disc is for Dometal listed. For additional identification, the following numbers stored in the product data can be used: 02KIE1.

Check dimensions and hole pattern before ordering

For a serrated disc, the existing machine should also be equipped with a corresponding edge shape; the serration is a significant distinguishing feature compared to smooth discs. For secure assignment, a direct dimensional comparison with the removed disc is recommended. Especially the bolt circle and hub mounting often differ between versions with the same diameter. The designation “suitable for Dometal” serves for assignment but does not replace the technical dimensional comparison within the respective series.