Disc harrow disc 510 mm x 5 mm, serrated suitable for Amazone / BBG Catros

Disc harrow disc 510 x 5 mm, serrated – suitable for Amazone / BBG

For the precise replacement of a worn disc, dimensions and fastening are especially important. This disc harrow disc has an outer diameter of 510 mm and a material thickness of 5 mm. The serrated edge shape and the hole geometry should match the previously mounted disc. It is listed for Amazone / BBG. Additionally, the disc is designated as Niaux quality.

Technical data of the disc

• Outer diameter: 510 mm
• Thickness: 5 mm
• Edge shape: serrated
• Number of holes: 4
• Hole diameter / bore: 11,5 mm
• Pitch circle diameter: 120 mm
• Quality / manufacturer designation: Niaux quality

Suitable for and comparison numbers

The disc is for Amazone / BBG listed. For additional identification, the following numbers stored in the product data can be used: Diameter 510, 5001-2, 6001-2.

Check dimensions and hole pattern before ordering

For a serrated disc, the existing machine should also be equipped with a corresponding edge shape; the serration is a significant distinguishing feature compared to smooth discs. Check the dimensions preferably on the dismantled disc or based on the spare parts documentation of your machine. A selection based solely on manufacturer or outer diameter is often not sufficient for disc harrows. The indication “suitable for Amazone / BBG” serves for assignment but does not replace the technical dimension comparison within the respective series.