Disc harrow disc 460mm x 4mm, wavy suitable for Kuhn 110032

Disc harrow disc 460 x 4 mm, wavy – suitable for Kuhn

For the precise replacement of a worn disc, dimensions and fastening are particularly important. This disc harrow disc has an outer diameter of 460 mm and a material thickness of 4 mm. The wavy edge shape and the hole geometry should match the previously mounted disc. It is listed for Kuhn.

Technical data of the disc

• Outer diameter: 460 mm
• Thickness: 4 mm
• Edge shape: waved
• Number of holes: 6
• Hole diameter / bore: 10,5 mm
• Pitch circle diameter: 100 mm

Suitable for and comparison numbers

The disc is for Kuhn listed. For additional identification, the following numbers stored in the product data can be used: 110032.

Check dimensions and hole pattern before ordering

The wavy edge shape is a distinctive design feature and should be matched with the existing disc when replacing. Use the technical data not only by diameter but as a complete hole pattern. The number and shape of the holes as well as the bolt circle are just as relevant for installation as diameter and thickness. The designation "suitable for Kuhn" serves for classification but does not replace the technical dimension comparison within the respective series.