Disc harrow disc 460mm x 4mm, serrated suitable for Becker

Disc harrow disc 460 x 4 mm, serrated – suitable for Becker

For the precise replacement of a worn disc, dimensions and mounting are especially important. This disc harrow disc has an outer diameter of 460 mm and a material thickness of 4 mm. The serrated edge shape and the hole geometry should match the previously mounted disc. It is listed for Becker. Additionally, the disc is specified as Niaux quality.

Technical data of the disc

• Outer diameter: 460 mm
• Thickness: 4 mm
• Edge shape: serrated
• Number of holes: 4
• Hole diameter / bore: 11 mm
• Pitch circle diameter: 100 mm
• Quality / manufacturer designation: Niaux quality

Suitable for and comparison numbers

The disc is for Becker listed. For additional identification, the following numbers stored in the product data can be used: 31-2118FF.

Check dimensions and hole pattern before ordering

For a serrated disc, the existing machine should also be equipped with a corresponding edge shape; the serration is a significant distinguishing feature compared to smooth discs. Check the dimensions preferably on the removed disc or based on the spare parts documentation of your machine. A selection based solely on manufacturer or outer diameter is often not sufficient for disc harrow discs. The designation “suitable for Becker” serves for assignment but does not replace the technical dimension comparison within the respective series.