Disc harrow disc 460mm x 4mm, flat smooth suitable for Amazone / BBG|XL041

Disc harrow disc 460 x 4 mm, flat smooth – suitable for Amazone / BBG

For the precise replacement of a worn disc, dimensions and fastening are particularly important. This disc harrow disc has an outer diameter of 460 mm and a material thickness of 4 mm. The smooth edge shape and the bore geometry should match the previously mounted disc. It is listed for Amazone / BBG. Additionally, the disc is designated as Niaux quality. The flat design should also be considered when assigning.

Technical data of the disc

• Outer diameter: 460 mm
• Thickness: 4 mm
• Edge shape: smooth
• Version: flat
• Number of holes: 4
• Hole diameter / bore: 11,5 mm
• Pitch circle diameter: 120 mm
• Quality / manufacturer designation: Niaux quality

Suitable for and comparison numbers

The disc is for Amazone / BBG listed. For additional identification, the following numbers stored in the product data can be used: XL041.

Check dimensions and hole pattern before ordering

The smooth edge shape should match the previous equipment of the machine; it is an important selection criterion compared to serrated or wavy variants. Use the technical data not only by diameter but as a complete hole pattern. The number and shape of the holes as well as the bolt circle are just as relevant for assembly as diameter and thickness. The designation “suitable for Amazone / BBG” serves for allocation but does not replace the technical dimension comparison within the respective series.