Disc harrow disc 460mm x 4mm, flat serrated suitable for Farmet

Disc harrow disc 460 x 4 mm, flat serrated – suitable for Farmet

For the precise replacement of a worn disc, dimensions and fastening are especially important. This disc harrow disc has an outer diameter of 460 mm and a material thickness of 4 mm. The serrated edge shape and the hole geometry should match the previously mounted disc. It is listed for Farmet. Additionally, the disc is designated as Niaux quality. The flat design should also be considered when assigning.

Technical data of the disc

• Outer diameter: 460 mm
• Thickness: 4 mm
• Edge shape: serrated
• Version: flat
• Number of holes: 5
• Hole diameter / bore: 12,5 mm
• Pitch circle diameter: 102 mm
• Quality / manufacturer designation: Niaux quality

Suitable for and comparison numbers

The disc is for Farmet listed. For additional identification, the following numbers stored in the product data can be used: 31-0756.

Check dimensions and hole pattern before ordering

For a serrated disc, the existing machine should also be equipped with a corresponding edge shape; the serration is a significant distinguishing feature compared to smooth discs. Before ordering, compare outer diameter, thickness, number of holes, hole diameter, bolt circle and centre hole or hub mounting. Even small deviations in the hole pattern can cause a disc not to fit despite identical outer diameter. The designation 'suitable for Farmet' serves for assignment but does not replace the technical dimension comparison within the respective series.