Disc 430mm x 5 mm, serrated suitable for Väderstad|444687

Disc 430 x 5 mm, serrated – suitable for Väderstad

For the precise replacement of a worn disc, dimensions and mounting are especially important. This disc has an outer diameter of 430 mm and a material thickness of 5 mm. The serrated edge shape and the hole geometry should match the previously mounted disc. It is listed for Väderstad. Additionally, the disc is designated as Niaux quality.

Technical data of the disc

• Outer diameter: 430 mm
• Thickness: 5 mm
• Edge shape: serrated
• Number of holes: 4
• Hole diameter / bore: 12,5 mm
• Pitch circle diameter: 98 mm
• Quality / manufacturer designation: Niaux quality

Suitable for and comparison numbers

The disc is for Väderstad listed. For additional identification, the following numbers stored in the product data can be used: 444687, 459608.

Check dimensions and hole pattern before ordering

For a serrated disc, the existing machine should also be equipped with a corresponding edge shape; the serration is a significant distinguishing feature compared to smooth discs. Please check the dimensions preferably on the dismantled disc or based on the spare parts documentation of your machine. A selection based solely on manufacturer or outer diameter is often not sufficient for concave discs. The designation "suitable for Väderstad" serves for classification but does not replace the technical dimension comparison within the respective series.